Description

Technische Daten:
- Länge: 705mm
- Höhe: 205mm
- Breite: 110mm
- Hauptrotordurchmesser: 734mm
- Heckrotordurchmesser: 171mm
- Motor Ritzel: 11 Zähne
- Antriebszahnrad: 121 Zähne
- Autorotationszahnrad: 106 Zähne
- Heckrotorzahnrad: 26 Zähne
- Getriebeübersetzungen: 11:1:4.07
- Gewicht ohne Akku: ca 730g

Inhalt:
1x T-REX 450LP 3S / ARTF (almost ready to fly)
1x MINIGRS Flybarless System
1x A10 Transmitter
1x A6B Receiver
1x RCE-BL45P 45A Brushless ESC
1x 460MX Brushless Motor (3200KV)
3x DS450 Digital Servo
1x DS455 Digital Servo
1x Paar 325 Carbon Fiber Blades
1x LiPo Akku 2200mAh/30C - 3S1P - 11.1V (Weight: 165g)
1x Balancer Charger RCC-3SX
4x Battery AA 1.5V

Wird noch benötigt:
- Pitch Messgerät


A10 Transmitter Specification:
- Channel: 10-Channel
- Available Models: helicopter/airplane/multicopter
- Frequency range: 2.4055 ~ 2.475 GHz
- Power: no higher than 20dBm
- System Mode: 2.4G system AFHDS 2A
- Suitable Voltage Range: 4.0 ~ 6.0V DC
- Receiving Distance: the open ground no interference < 1000M
- Low Voltate Warning: Lower than 4.2V
- Weight: 487g (excluded battery)
- Size: 187x89.6x215mm

MINIGRS FBL Specification:
- Operating voltage range: DC 3.5~8.4V
- Operating current consumption: <100mA @ 4.8V
- Rotational detection rate: ±300°/sec
- Rudder yaw detection rate: ±600°/sec
- Sensor resolution: 12 BIT
- Swashplate Support: 120° CCPM Swashplate
- Mode Support: T-REX250, T-REX450, T-REX470, T-REX500
- Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX
- Operating temperature: -20? ~ 65?
- Operating humidity: 0% ~ 95%
- Comply with RoHS
- Size: 37.6x22.4x13mm

Balance Charger RCC-3SX Specification:
- Input Voltage: AC 100V~240V(50/60Hz)
- Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V
- Supported Battery Type: Li-polymer / Li-ion
- Charging Method: CC/CV
- Charging Current: 2A
- Size: 123x74.3x32mm
- Weight: 260g

LiPo-Akku Specification:
- Output: 11.1V 2200mAh 24.4Wh(3S1P)
- Supports 5C charging
- Dimension: 104x36x22mm
- Weight: 165g
- 14AWG heat-resistant silicone rubber wire. Heat resistance: 200 ° C / Current withstand: 50A